Network Camera User’s Guide
48/83
The upgrade progress status information will be displayed on the screen.
Warning: The download firmware procedure can not be interrupted. If the
power and/or network connection are broken during the download procedure, it
might possibly cause serious damage to the Network Camera. Suggest that do not
upgrade firmware via Wireless LAN due to high error rate possibly.
Please be aware that you should not turn off the power during updating the firmware and
wait for finish message.
Once the upgrading process completed, the Network Camera will reboot the system
automatically.
Note: please wait for 20 seconds, and then you can connect to Network Camera again.
To Next Page
Loading...
Need help?
General