Verderflex Vantage 3000 P - Page 33

Vantage 3000 P Version 3.4v-01/2019
33 | Page
13 List of Figures and Tables
13.1 List of Figures
Figure 1 Tamper Proof Lable 6
Figure 2 25 way ‘D’ Type Connector (Remote
Control Lead P/N: AU E1973) 8.17
Figure 3 IP66 Computer Control 11.2
Figure 4 Back Plate – Vantage 3000 P 12.2
Figure 5 Back Plate – Vantage 3000 P 12.2
Figure 6 25 Way ‘D’ Type Connector 12.4
Figure 7 Connecting the Footswitch 12.5
Figure 8 Connecting Variable Voltage/Current Source 12.6
Figure 9 25 Way ‘D’ Type Connector 12.7
Figure 10 Connecting the Footswitch 12.7.2
Figure 11 Opening the Control Panel 12.7.3
Figure 12 Opening “System Settings” 12.7.3
Figure 13 Opening “Device Manager” 12.7.3
Figure 14 Opening “Port Settings” 12.7.3
Figure 15 Opening “USB Serial Port Settings” 12.7.3
13.2 List of Tables
Table 1 Keypad Keys and Symbols 1
Table 2 Keypad Key Combinations 1
Table 3 Vantage 3000 P Pump Head Options 7.1
Table 4 Installing the Tube 7.2.2
Table 5 Replacing Pump Head – EZ Head 7.2.3
Table 6 Stacking – EZ Head 7.2.4
Table 7 Installing Tube – S10 Head 7.3.1
Table 8 Installing Tube – R3i Head 7.4.2
Table 9 Replacing the Rotor – R3i Head 7.4.3
Table 10 Analogue /Digital Remote Interface 8.17
Table 11 Models & Control Features Available 12.3
Table 12 Analogue/Digital Connector Pins 12.4
Table 13 Pin Function & Connection 12.5.1
Table 14 Pin Connection for Analogue Control
(refer table 2 for pin description) 12.6.1
Table 15 Digital Connector Pins 12.7.2
Table 16 Declaration of Conformity 14
Table 17 Specication Ratings 15.1
33 | Page