5
1.1.1 -SET TIME
From the main menu enter 1, 1, 1 to SET THE TIME. The screen will show:
Enter the exact hour, minutes and seconds.
Use the left/right arrows to position on the time to be changed, enter the new values.
Use the right and left arrows to change AM/PM and press OK to save.
Press NO to escape from this menu without saving any settings.
1.1.2 -SET DATE
From the main menu enter 1, 1, 2 to SET THE DATE. The screen will show:
Enter in sequence the exact month, day and year or use the arrow buttons to position on
the parameter which needs to be changed and enter the new values. Press OK to save
your settings.
Press NO to escape from this menu without saving any settings.
Important:
The machine's clock can be automatically synchronized through an internet NTP time
server. The machine must be connected to the internet network for clock synchronization
to occur. It will automatically update the time once a day and each time the machine is
turned on. Be sure the correct time zone and DST setting are selected when using this
function.
To Next Page
Loading...
Need help?
General