Verdin DBC 870 - Setting the Tower Clock Hands

6
1.1.7 -SETTING THE TOWER CLOCK HANDS
To set the tower clock hands press 1 1 7 from the main menu. The screen will show:
Enter the actual position of the tower
clock hands. Press OK each time to confirm
the settings. The following screen will appear:
Use the side arrows to confirm the upgrade to either YES or NO
Confirm by pressing OK.
Press NO to escape without saving any settings.
When the time is being adjusted through this menu, the tower clock hands are
temporarily stopped to enable the user to correctly identify the position of the
clock hands. Remember to enter the ACTUAL position of the hands NOT the
desired position.