VeriFone Commander Site Controller Configuration Guide

2
System Requirements
Supported Hardware
• MX800 Series: MX 850, 860, 870, and 880 support EMV functions if equipped with a
chip reader.
• MX900 Series: MX915 and MX925
• Commander Site Controller/RubyCi with Topaz
• Commander Site Controller/RubyCi with Ruby2
• Sapphire V910/V920 with Topaz
• Sapphire V910/V920 with Ruby
Supported Software
Commander Site Controller/RubyCi systems require Production Software Base 42+.
Sapphire systems require Production Software Base 188+.
All MX PINpad devices require VIPERPay 4.xx+
MX900 Series devices require Kernel 7.00+.
MX800 Series devices require Kernel 4.00+ and must have RFS18.
MX800 Series devices without RFS18 must be upgraded at the Verifone repair facility.
See How to Tell if Your MX800 Series PINpad is EMV Capable at support.verifone.com.
Supported Card Brands
Inside contact EMV supports the following card brands:
•American Express
•Discover
• Mastercard
•Visa
EMV implementation requires PINpad hardware with EMV Chip
Reader capability.
POS System Software may be eligible to Upgrade through
Verifone’s Remote Software Delivery. For more information visit
support.verifone.com and select Support Channels>Petro &
Convenience>Product Pages: Verifone Remote Software Delivery.
Refer to the Inside Contact EMV Feature Reference for details on
determining software versions of MX and POS devices.

VeriFone Commander Site Controller Specifications

General

Brand	VeriFone
Model	Commander Site Controller
Category	Touch terminals
Language	English