Forecourt Controller Interface Installation Guide 31
August 11, 2016
6. Plug the female end of the power cord into the power connector on the
FCI box. Make sure the connector locks securely in place.
7. Plug the other end of the power cord into the dedicated AC outlet.
Caution: The circuit providing power to the FCI unit must not power other
devices. The AC outlet must be within six feet of the FCI unit. Do not
use extension cords.
The power supply cord must not be attached to the building surface
nor through walls, ceilings, floors, or similar openings in the
building structure.
Installation measures must be taken to prevent physical damage to
the power supply cord, including proper routing of the power supply
cord.
8. Restore power to the circuit.