Need help?Do you have a question about the VeriFone Forecourt Controller Interface and is the answer not in the manual?
General| Power Supply | 24V DC |
|---|---|
| Humidity Range | 5% to 95% non-condensing |
| Interface Type | RS-485 |
| Compatibility | VeriFone |
| Communication Protocol | VeriFone proprietary protocol |
Provides information on the product warranty for the FCI.
Details the functionality of the Forecourt Controller Interface (FCI) box.
Outlines prerequisites and initial checks before FCI installation.
Instructions on how to inspect and unpack the Forecourt Controller Interface box.
Lists essential electrical and safety requirements for FCI installation.
Critical safety warnings and precautions for FCI installation and use.
Guidelines for selecting an appropriate indoor mounting location for the FCI box.
Information on handling existing site equipment during FCI installation.
Specifies conditions for SFC usage and FCI board requirements.
Procedures for installing FCI at Gilbarco sites with existing distribution boxes.
Steps for installing FCI at Wayne sites, handling distribution boxes and electronics.
Notes on Tokheim site requirements and necessary communication connections.
Information for installing FCI at Bennett sites using the 515 Box.
Steps to prepare the FCI enclosure, such as loosening cover screws.
Instructions for installing current loop and RS485 boards into the FCI.
Guidance on physically mounting the Forecourt Controller Interface box securely.
Procedures for connecting dispenser cables to the FCI box.
Details on wiring loop cables to the current loop boards for dispensers.
Instructions for connecting dispenser wires to the RS485 boards.
Specific instructions for connecting the FCI to a Tokheim TED unit.
Final steps including closing the box, connecting cables, and power.
To Next Page
