Secure PumpPAY Retrofit Kit Configuration Guide
14 November 10, 2011
2. Press [ENTER] to display the following screen. Then, press the numeric keys to specify the
fuel position, which must be a unique number. If the fuel position is 2, press [0] then [2].
3. Press [ENTER] to accept the fuel position and return to the CONFIG menu.
Printer Configuration
1. On the CONFIG screen, press the right scroll key until PRINTER is displayed.
DCR poll Adr: 02
Enter to Accept
CONFIG POLL DCR
<-- ACCEPT -->
CONFIG PRINTER
<-- ACCEPT -->
To Next Page
Loading...
