Secure PumpPAY Retrofit Kit Configuration Guide
November 10, 2011 7
DIAGNOSTICS (Not Supported)
The Diagnostics function in System Mode is not supported. Diagnostic functions should be performed
only in Manager Mode.
FILE TRANSFER (Not Supported)
The File Transfer menu is not supported.
FILE MANAGER
You can use the following functions from the File Manager menu.
■ RUN APPLICATION—Exits System Mode and starts the application without rebooting the
MX 760.
■ RESTART—Reboots the terminal and starts the application if an application is loaded.
Otherwise, it will reboot the terminal and return to System Mode.
■ EXPLORE FILES—Displays the files on the system.
■ The remaining File Manager options are not supported.
SECURITY
The Security menu is not supported. Use Manager Mode to display debit key status and key type. The
Secure PumpPAY Installer is used to load key packages.
Entering Manager Mode
The MX 760 terminal has a Manager Mode to access the menus. You must enter Manager Mode each
time you want to configure the terminal or change the configuration.
Important:After you finish making configuration settings, you must exit all the way out of
Manager Mode to save the settings.
To access Manager Mode
1. At the main welcome screen, press the [#] key and [1] almost simultaneously, pressing the [#]
key first and then quickly pressing the [1] key. The following screen is displayed.
Address Mode
Clear to exit
To Next Page
Loading...
