Secure PumpPAY Retrofit Kit Configuration Guide
30 November 10, 2011
5. When videos are enabled, the following screen is displayed. Press the appropriate key to
disable idle or fueling videos, or both.
6. From the CONFIG VIDEO screen press [
*
] to return to the Configuration function.
Media Proxy Configuration
Use this configuration function to enter the IP address for the PAYMEDIA media proxy.
1. On the CONFIG screen, press the right scroll key until MEDIAPROXY is displayed.
< Disable Idle
Back >
< Disable Fuel
Video
CONFIG MEDIAPROXY
<-- ACCEPT -->
To Next Page
Loading...
