Secure PumpPAY Retrofit Kit Configuration Guide
32 November 10, 2011
2. Press [ENTER].
3. Do one of the following:
– To leave the rate unchanged, select Quit.
– To change the rate, select the rate and then select Quit.
4. From the CONFIG BAUD RATE screen:
a. press Press [
*
] to return to the Configuration function.
b. Press [
*
] twice to exit the Configuration function and finish loading the MX 760 software.
Important:After you finish making configuration settings, you must exit all the way out of
Manager Mode to save the settings.
VVES Configuration
The CONFIG VVES feature will be available in a future release.
Select baud
Current: 9600
< 9600
< 19200
Quit >
To Next Page
Loading...
