Secure PumpPAY Retrofit Kit Configuration Guide
18 November 10, 2011
10. Press [ENTER] to display the line feed options for the printer. This number controls the
number of line feeds that will be output at the end of a receipt. The default value is 16. The
range of accepted values is 6 to 16 lines. To change the default value, use the keypad to enter a
new value, and then press the Accept menu key.
11. Press the right scroll key to move forward in the menu until PRINTERLOW PAPER is
displayed. This option lets you enable or disable the “low paper” display on the Ruby,
overriding the setting on the Ruby itself. Note that an “out of paper” message will still be
displayed regardless of this setting.
Enter No of feeds
Current: 6
Range: 6 . . 16 feeds
Accept Quit
PRINTERLOW PAPER
<-- ACCEPT -->
To Next Page
Loading...
