VeriFone MX 760 - Enabling;Disabling Broadcast

Secure PumpPAY Retrofit Kit Configuration Guide
22 November 10, 2011
2. On the Enable network? screen, do one of the following:
– Select YES to enable the MX 760 network connection. The screen briefly displays the
NETWORK ENABLED message.
– Select NO to disable the MX 760 network connection. The screen briefly displays the
NETWORK DISABLED message.
– Select Quit to leave the network connection unchanged.
3. Press [
*
] to return to the FUNCTION screen.
Enable network?
< YES NO >
Quit >
FUNCTION CONFIG
<-- ACCEPT -->