Secure PumpPAY Retrofit Kit Configuration Guide
November 10, 2011 47
– If debit type is not set up in the configuration or has not been loaded, the one of the
following messages is displayed: “Debit mode not set,” or “No Debit Key Found.”
8. Select the menu key next to RFID to run the RFID test.
9. The RFID reader is located above the MX 760 card reader. Tap a card with an RFID chip on
the reader to display the following screen. (To return to the test menu, press [CANCEL].)
10. The screen displays for a few seconds and then returns to the previous screen.
RFID Reader Test
Tap Card
CAN to return
RFID Reader Test
Track 1: 60
Track 2: 37
RFID Reader Test
Tap Card
CAN to return
To Next Page
Loading...
