VeriFone MX 760 - Running Gemstall for Shell Sites

Secure PumpPAY Retrofit Kit Configuration Guide
58 November 10, 2011
2. Press the [#] key and [1] almost simultaneously again. If a password has been set, the
following screen is displayed. Note that this screen does not display the first time you enter
Manager Mode.
3. Enter the password and press [ENTER]. The screen displays the current settings. For
example:
Enter Password
DCR:02
Press ENT key
Mode: DEBIT SET
Printer: CUSTOM
ENC: (see IKSN)
Printer Speed: 115200
Min/Max poll: 10/1270
IP: 169.254.196.41 Ena
Ver: v20007 26 Oct 2011
MP IP 192.168.31.1