Secure PumpPAY Retrofit Kit Configuration Guide
62 November 10, 2011
Note: If images have been installed for fueling, they will display for 5 seconds only. If you
have configured more than 5 seconds, the remaining images are not shown.
If a video has been loaded, it will play until you press a key.
If the MX 760 is not connected to a printer, the Clerk has Receipt screen is displayed for a few
seconds, and then returns to the WELCOME screen.
9. From the WELCOME screen you can run another demo or press the menu key next to EXIT
DEMO to return to the FUNCTION menu.
10. Press [
*
] to return the MX 760 idle screen.
To Next Page
Loading...
