VeriFone P400 Installation Guide

11
© VeriFone, Inc. All rights reserved.
Installation Guide P400/P400 Plus
2. Device Setup
This section outlines the setup procedures for the P400, covering the following segments:
• Selecting Location
• PIN Protection Measures
• Unpacking Shipping Carton
• MSAM/uSD Cards
• Power Supply
• Cable Connections
• Smart Card Reader
• Magnetic Stripe Card Reader Use
• Contactless Transactions
• Optional Accessories
• Periodic Inspection
Selecting
Location
Use the following guidelines to select the best location for the P400 device.
To Select a Location
Choose a location convenient for both merchant and client:
• Far from heavy metal objects,
• A flat support surface such as a countertop or a table,
• Near a power outlet and the terminal or computer that connects to the P400.
Environmental
Factors
• Do not use the unit where there is high heat, dust, humidity, moisture, or caustic
chemicals or oils.
• Keep the unit away from direct sunlight and anything that radiates heat, such
as a stove or a motor.
For safety, do not string cables or cords across a walkway.
Par mesure de sécurité, ne pas les câbles de chaîne ou de cordons à travers une
passerelle.

VeriFone P400 Specifications

General

Operating Temperature	0°C to 50°C (32°F to 122°F)
Connectivity	Ethernet
Card Readers	EMV, NFC, MSR, Contactless
Security	PCI PTS 5.x approved
Power Supply	5V DC
Memory	384 MB (256 MB Flash, 128 MB SDRAM)
Display	3.5-inch color LCD with touchscreen