VeriFone VX 680 User Manual

15
Replacing printer paper.
VX 820 model
1. Remove the terminal from the cradle.
2. Open the printer cover by lifting the lever on the cradle. Remove any remaining roll
of paper.
3. Lay the new roll in the printer with the paper being fed from the bottom of the roll.
Paper feeds from back to front
Paper feeds upwards from front of terminal
4. Close the printer cover. Ensure the cover clicks into place, and the paper has
been threaded through the gap between the cover.
VX 680 model
1. Remove the terminal from the charging cradle.
2. Open the printer cover by lifting the lever on the back of the terminal. Remove
any remaining roll of paper.
3. Lay the new roll in the printer with the paper being fed from the bottom of the roll.
4. Close the printer cover. Ensure the cover clicks into place, and the paper has
been threaded through the gap between the cover.

VeriFone VX 680 Specifications

General

Display	3.5” QVGA (320 x 240 pixels) color LCD with backlight
Connectivity	Wi-Fi, Bluetooth, Ethernet
Processor	400 MHz ARM11 processor
Memory	128 MB Flash, 64 MB SDRAM
Operating System	Verix
Card Readers	MSR, EMV smart card reader, contactless/NFC
Printer	Integrated thermal printer
SAM Slots	3 SAM slots
Peripheral Ports	RS-232 port, USB port
Power Supply	AC adapter (100-240V), Battery backup
Weight	500g