VERITAS Simone - Page 11

11
TABLE OF CONTENTS
1. KNOWING YOUR MACHINE
Identication chart ------------------------------------------------------------------------------------- 14 - 15
Accessories --------------------------------------------------------------------------------------------- 16 - 17
Setting up your machine ----------------------------------------------------------------------------- 18 - 19
Preparation for threading ---------------------------------------------------------------------------- 20 - 22
Lint tray, Cutting width gauge, Thread cutter --------------------------------------------------- 23 - 24
Changing presser feet, Changing needle ------------------------------------------------------- 25 - 26
Needle, thread and fabric chart -------------------------------------------------------------------- 27 - 28
2. STARTING TO SEW
Threading your machine ----------------------------------------------------------------------------- 29 - 35
Helpful hints --------------------------------------------------------------------------------------------- 36 - 37
Testing stitch overlock stitches --------------------------------------------------------------------- 38 - 39
Setting chart -------------------------------------------------------------------------------------------- 40 - 47
Adjusting thread tensions---------------------------------------------------------------------------- 48 - 51
Three-thread overlock with one needle, Narrow and rolled hem, picot stitch ---------- 52 - 55
Recommended Thread ------------------------------------------------------------------------------------- 56
Converting to two-thread use ----------------------------------------------------------------------- 57 - 60
Adjusting stitch length, Adjusting overedge cutting width, Stitch nger ------------------ 61 - 62
Di󰀨erential feed ---------------------------------------------------------------------------------------- 63 - 64
Foot pressure regulator ------------------------------------------------------------------------------ 65 - 68
Sewing with extra heavyweight fabric or multiple layers of fabric ------------------------- 65 - 68
Basic techniques
Turning outside corners without cutting threads -------------------------------------------- 69 - 70
Turning curved edges ----------------------------------------------------------------------------- 69 - 70
Turning Inside Corner, Removing stitches from sewn fabric ---------------------------- 71 - 72
Corded overlock ------------------------------------------------------------------------------------ 73 - 76
Decorative e󰀨ects ---------------------------------------------------------------------------------- 77 - 78
Di󰀨erential feed applications -------------------------------------------------------------------- 79 - 81
3. CARING FOR YOUR MACHINE
Replacing moving cutter, Disengaging moving cutter ---------------------------------------- 82 - 83
Cleaning and oiling ------------------------------------------------------------------------------------ 84 - 85
4. CHECKING PERFORMANCE PROBLEMS --------------------------------------------------- 86 - 89
5. SPECIAL ACCESSORIES -------------------------------------------------------------------------- 90 - 91
6. OPTIONAL ACCESSORIES --------------------------------------------------------------------- 92 - 103