VERITAS Simone - Checking Performance Problems

87
PROBLEM PROBABLE CAUSE CORRECTION
Irregular Stitches
Incorrect Thread Tension(s).
Incorrect size Needle.
Improper Threading.
Pulling Fabric.
Loose Presser Foot.
Reset Thread Tension(s).
Choose correct size Needle for
Thread and Fabric.
Re-thread Machine.
Do not pull Fabric; guide it gently.
Reset Presser Foot.
Breaking Needle
Pulling fabric.
Incorrect size Needle.
Incorrect setting of Needle.
Loose Presser Foot.
Do not pull Fabric; guide it gently.
Choose correct size Needle for
Thread and Fabric.
Reset Needle.
Reset Presser Foot.
Puckering
Incorrect Thread Tension(s).
Bent or blunt Needle.
Di󰀨erential feed is set incorrectly.
Reset Thread Tension(s).
Insert new Needle.
Set it at less than 1.
Wavering
Di󰀨erential feed is set incorrectly. Set it at 1 or at more than 1.
for knitted fabrics.
Skipping Stitches
Incorrect size Needle.
Improper Threading.
Bent or blunt Needle.
Incorrect setting of Needle.
Re-thread Machine.
Choose correct size Needle for
Thread and Fabric.
Insert new Needle.
Reset Needle.
Breaking Threads
Improper Threading.
Bent needle.
Thread Tension(s) too tight.
Incorrect setting of Needle.
Thread Spool tangled.
Thread Guide Pole not extended.
Re-thread Machine.
Insert new Needle.
Reset Thread Tension(s).
Reset Needle.
Reset Spool properly.
Fully extend Guide Pole.
4. CHECKING PERFORMANCE PROBLEMS