Verizon CE1000A - Page 42

42
 / WIFI SETTINGS
©2023 Verizon. All Rights Reserved
2. Use one of the following methods:
• If your Wi-Fi client device has a WPS button, press the
WPS button on your Extender for more than two seconds,
then click the
Start WPSStart WPS button in Option 1Option 1 to start the
WPS registration process.
• If your client device has a WPS PIN, locate the PIN printed
on the client’s label or in the client documentation. Enter
the PIN number in
Option 2Option 2 on the user interface.
• Click RegisterRegister.
• Alternatively, you can enter the Extender’s PIN shown on
this screen into the WPS user interface of your device, if
this PIN mode is supported by your Wi-Fi device.