GETTING TO KNOW YOUR
VERIZON WIFI EXTENDER
Status LED
Condition Status LED Color Verizon Wi-Fi Extender
Normal WHITE Normal operation (50% solid)
Setup complete (solid)
Extender is booting (soft blink)
System restart (fast blink)
BLUE Pairing mode (hard blink)
WPS pairing successful (fast blink)
GREEN Wi-Fi has been turned o (solid)
Issue(s) YELLOW No internet connection (solid)
Extender is too far from the Router. Poor
backhaul signal (hard blink)
Extender is too close to the Router. Poor
Wi-Fi coverage (fast blink)
RED Hardware/System failure detected (hard
blink)
Overheating (fast blink)
WPS pairing failure (fast blink)
Power OFF Power o
1.3b/ REAR PANEL
The rear panel of your Verizon Wi-Fi Extender has a label that
contains important information about your device, including the
default settings for the Verizon Wi-Fi Extender’s Wi-Fi network
name (SSID), Wi-Fi password (WPA2 key), local URL for accessing
To Next Page
Loading...
