Verizon Fios E3200 - Page 11

11
 / INTRODUCTION
verizon.com/fios | ©2019 Verizon. All Rights Reserved
factory default settings, press and hold the button for at least ten
seconds.
• Power - connects your Fios Home Wi-Fi Extender to an electrical
wall outlet using the supplied power adapter.
Warning: The included power adapter is for home use only,
supporting voltages from 105-125 voltage in AC. Do not use in
environments with greater than 125 voltage in AC.
1.3c/ MOUNTING THE FIOS HOME WIFI EXTENDER TO A WALL
For optimum performance, the Fios Home Wi-Fi Extender is
designed to stand in a vertical upright position. Verizon does not
recommend wall mounting the Fios Home Wi-Fi Extender. However,
if you wish to mount your Fios Home Wi-Fi Extender, you can
purchase a wall mount bracket from the Verizon Fios Accessories
Store at verizon.com/home/accessories/networking-wifi
To mount your Fios Home Wi-Fi Extender to a wall:
1. You may use the wall-mount template sheet for positioning
the Fios Home Wi-Fi Extender.
2. Mark the mounting holes using the template sheet as shown
below.