3. Select a source address in the Specify Address field or enter
an IP address in the text box.
4. Enter the public IP address.
5. If using port forwarding, select the Enable Port Forwarding
for Static NAT check box.
6. Click Apply to save changes.
7. Repeat these steps to add additional static IP addresses.
6.6/ SECURITY LOG
You can view events that your firewall has blocked by accessing
the security log. Your Gateway reports events, such as attempts to
establish inbound and outbound connections, attempts to authenticate
at an administrative interface, such as your Gateway GUI, firewall
configuration, and system start-up.
The security log reports the following information:
• Time - based on the date and time in your Gateway
• Event - consists of firewall information, firewall setup, and system
log
• Event Type - describes the event that occurred, such as a
fragmented packet or parental controls.
• Details - provide a reason the event occurred, such as a packet has
been blocked because of parental controls.
104
SECURITY SETTINGS
06 / CONFIGURING
verizon.com/fios | ©2014 Verizon. All Rights Reserved.
To Next Page
Loading...
Need help?
General
