• Router Advertisement Lifetime (minutes between 0-150)
• Interfaces - check one or more of the box(s) to apply IPv6
LAN settings to the selected interfaces:
– Ethernet/Coax IPv6 Enabled
– Wireless Access Point 1 IPv6 Enabled
– Wireless Access Point 2 IPv6 Enable
3. After entering all appropriate IPv6 settings click Apply to
have changes take effect.
LAN IPv6 STATELESS WITH NO WAN SETTINGS:
1. To configure IPv6 LAN Stateless mode with No WAN
connection, select the Stateless option on the IPv6
Configuration Control Page as shown below:
2. Specify the Stateless settings to be used to assign LAN IPv6
addresses by entering the following details:
• IPv6 LAN Configuration (select Stateless from the drop-
down list) as shown in drop-down list and page below:
ROUTING