EasyManuals Logo

Vertex Standard VX-420 Series Service Manual

Vertex Standard VX-420 Series
63 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8
Specifications
GENERAL Specifications
Frequency Range: 146 - 174 MHz
Number of Channels: 32 (16+16) channels
Number of Groups: 2 groups
Channel Spacing: 12.5 / 20 / 25 kHz
PLL Steps 2.5 / 6.25 kHz
Operating Voltage: 7.5 VDC ± 20%
Battery Life ( w/ save): 12.5h (16h) w/ FNB-V67LI
(Rx 5 : Tx 5 : STBY 90 Duty) 7h (8.8h) w/ FNB-V57
Temperature Range: –22°F to +140°F (–30°C to +60°C)
Frequency Stability: ±2.5 ppm
Dimensions (WHD): 2.3" x 4.3" x 1.2" (58 x 18.5 x 30 mm) w/FNB-V67LI
Weight (approx.): 10.6 oz (300g) w/Ant. Battery (FNB-V67LI) and Belt Clip
RECEIVER Specifications (Measurements made per TIA/EIA-603)
Sensitivity (12 dB SINAD) : 0.25 µV
Adjacent Channel Selectivity (W/N) : 70 / 65 dB
Intermodulation (W/N): 70 dB
Spurious and Image Rejection: 70 dB
Hum and Noise (W/N) : 45 / 40 dB
Audio output: 500 mW @4 Ohms, 5% THD
TRANSMITTER Specifications (Measurements made per TIA/EIA-603)
Power output: 5 / 1 W
Modulation (W/N): 16K0F3E, 11K0F3E
Spurious Emissions: 70 dB
FM Hum and Noise Analog (W/N): 45 / 40 dB
Audio Distortion: Less than 3% @ 1 kHz
Measurements per EIA standards unless noted above. Specifications subject to change without notice or obligation.

Other manuals for Vertex Standard VX-420 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vertex Standard VX-420 Series and is the answer not in the manual?

Vertex Standard VX-420 Series Specifications

General IconGeneral
BrandVertex Standard
ModelVX-420 Series
CategoryTransceiver
LanguageEnglish

Related product manuals