EasyManua.ls Logo

Vertex Standard VX-4200 Series - SAFETY;WARNING INFORMATION; Safety Training Information; Antenna Installation

Vertex Standard VX-4200 Series
63 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications
General
Frequency Ranges: 134 -174 MHz
Emission Type: F3E
Channel Spacing: 12.5/20/25 kHz
Number of Channels: 8 channels (VX-4100 Series)
501 channels (VX-4200 Series)
Power Supply Voltage: 13.6 V ± 10% (50 W version)
13.8 V ± 10% (25 W version)
Current Consumption (@13.6 V): 11 A (TX: 50 W)
300 mA (RX: SQL Closed)
2.5A (RX: 2 W AF Out)
Operating Temperature Range: –22 °F to +140 °F (–30 °C to +60 °C)
Frequency Stability: ±2.5 ppm (–22 °F to +140 °C [–30 °C to +60 °C])
Antenna Impedance: 50
Case Size (W x H x D): 6.5" x 1.7" x 6.1" inch (165 x 43 x 155 mm) (W/O knob)
Weight (Approx.): 3.1 lbs (1.4 kg)
Receiver
Circuit Type: Double-conversion Superheterodyne
Intermediate Frequency: 1st: 50.85 MHz, 2nd: 450 kHz
Sensitivity (EIA 12 dB SINAD): 0.25 µV
Sensitivity (20 dB Quieting): 0.4 µV
Adjacent Channel Selectivity: 75 dB (12.5 kHz)
85 dB (25 kHz)
Spurious & Image Rejection: 90 dB
Intermodulation: 75 dB (12.5 kHz)
80 dB (25 kHz)
Hum & Noise: 44 dB (12.5 kHz)
50 dB (25 kHz)
Audio Output: 12 W @4 Ohms, 5% THD (External)
2 W @32 Ohms, 5% THD (Internal)
Transmitter
Modulation Type: Variable Reactance
Power Output: 50/25/10 W (50 W version)
25/12.5/5 W (25 W version)
Conducted Spurious Emission: 75 dB below Carrier
Maximum Deviation: ±2.5 kHz (12.5 kHz)
±5 kHz (25 kHz)
FM Hum & Noise: 44 dB (12.5 kHz)
50 dB (25 kHz)
Audio Distortion: 3 % (@1 kHz)
Specifications subject to change without notice or obligation.
A-1

Other manuals for Vertex Standard VX-4200 Series

Related product manuals