Vertical Edge 120 - Operation - Sending a Text Message

Page 28 Edge 120 Digital Executive Telephone User Guide
Operation – Sending a “Text” Message
1. You place a call to an extension and get no answer or busy…
CALLING STA xxx
cbck msg
STA xxx BUSY
cbck msg next
2. Press [msg].
MESSAGE TYPE
call me preprog
3. Press [preprog]. You are prompted to select the message:
EMPTY
send next chg
4. Select the text message to send:
4.1. To select from the preprogrammed list of text messages
to send, press [next] until the appropriate message is
displayed.
Or…
4.2. Press [chg] to input a custom message.
_
bksp save chg
4.3. Use the tables on the next page and dial pad keys to
input the message.