VERTIDRIVE B.V. | GIETERIJWEG 15 | 3089 JZ ROTTERDAM | THE NETHERLANDS - 26 -
T +31 (10) 763 02 00 | E SALES@VERTIDRIVE.COM | W WWW.VERTIDRIVE.COM
CHAMBER OF COMMERCE 24448205 | VAT NL 8201.77.064.B01
In all cases where we act as provider or supplier, our offers, orders placed with us, and agreements concluded with us are subject to the conditions and requirements laid down by the Netherlands Metal Association (the ‘Metaalunievoorwaarden’).
These conditions and requirements are filed with the registrar of the District Court of Rotterdam.
Handling of the Robot
1. Only the protection frame on the robot, as indicated in the image below, should be used to carry or move the
robot. Other parts are not suitable for handling / lifting the machine.
2. When carrying and handling the robot, take into consideration the total weight of 62 kg. Always follow local
health and safety regulations when handling the robot.
Holding points on protection frame suitable for robot handling.
The robot has very powerful magnets between the front wheels and at the back. Always keep your hands clear from
these areas to avoid getting caught between metal objects and the magnets! Be very careful that the magnets never
get close to any loose metal objects (e.g., tools) or construction parts that can move or are not rigidly attached to
the surface.
Locations of the very powerful magnets
To Next Page
Loading...
