VERTIDRIVE B.V. | GIETERIJWEG 15 | 3089 JZ ROTTERDAM | THE NETHERLANDS - 35 -
T +31 (10) 763 02 00 | E SALES@VERTIDRIVE.COM | W WWW.VERTIDRIVE.COM
CHAMBER OF COMMERCE 24448205 | VAT NL 8201.77.064.B01
In all cases where we act as provider or supplier, our offers, orders placed with us, and agreements concluded with us are subject to the conditions and requirements laid down by the Netherlands Metal Association (the ‘Metaalunievoorwaarden’).
These conditions and requirements are filed with the registrar of the District Court of Rotterdam.
8.1.8. Recover from an emergency stop
After an emergency stop, the system must return to its starting state. To reset the emergency stop, pull out the knob
while turning clockwise. Switch all power functions on the remote control to “off” and activate the system (as
described in section 8.1.4, startup).
In case the robot has fallen, and the fall arrester is activated it is necessary to lower the robot and release the tension
from the fall arrester. The fall arrester needs to be replaced immediately after a fall incident; the activated fall arrester
must be inspected before re-use is allowed. Refer to the fall arrester user manual for detailed instructions.
To Next Page
Loading...
