12 SPECIFICATIONS
MODEL NUMBER GXT3-5000RT208 GXT3-6000RT208 GXT3-8000RT208 GXT3-10000RT208
MODEL RATING 4000W/5000VA 4800W/6000VA 7200W/8000VA 9000W/10000VA
Dimensions, Rack Mount, W x D x H
Unit, in. (mm)
16.9 x 26.1 x 6.8 (430 x 662 x 173) 16.9 x 26.5 x 10.3 (430 x 672 x 261)
Shipping, in. (mm)
26.1 x 33.1 x 13.2 (662 x 842 x 336) 24.1 x 32.8 x 16.7 (612 x 832 x 424)
Weight
Unit, lb (kg)
56.2 (25.5) 78.3 (35.5)
Shipping, lb (kg)
92.6 (42)
Input AC Parameters
Nominal Operating Frequency 50 or 60Hz (Factory Default is 60Hz)
Factory Default VAC 120/208VAC at 120 degrees 120/208VAC at 120 degrees
L1-L2 Factory Default Input Phase Angle 120 degrees 120 degrees
Allowable Input Phase Angle
120, 180, 240 degrees, auto-sensing on application of alternating current
(Restrictions for L-N voltages other than 120VAC)
Factory Default L1-N, L2-N VAC 120 VAC nominal
User Configurable L1-N, L2-N VAC 100/110/115/120VAC (can be modified with configuration program)
Input Frequency w/o Battery Operation 40 - 70 Hz
Input Power Connection Hardwire Terminal Block 3W + G (L-L-N-G)
L1-N, L2-N Maximum Allowable VAC
150VAC
Output AC Parameters
Factory Default VAC 120/208VAC @ 120 degrees
L1-L2 Factory Default Output Phase Angle 120 degrees
Allowable Output Phase Angle 120, 180, 240 degrees, auto-sensing on initial application of input AC
Factory Default L1-N, L2-N VAC 120VAC nominal
User Configurable L1-N, L2-N VAC 100/110/115/120VAC, ±2%
L1-N, L2-N, Operating Load Range
105% to 130% 1 Minute
131% to 150% 10 seconds
151% to 200% 1 second
>200% (impact load) At least 5 cycles
Table 12.1
UPS specifications—5000, 6000, 8000 and 10,000 models
Vertiv | Liebert® GXT3 ™ Installer/User Guide | 57
To Next Page