Need help?Do you have a question about the Vertiv Liebert GXT RT+ Series and is the answer not in the manual?
General| Topology | Double Conversion Online |
|---|---|
| Input Frequency | 50/60 Hz |
| Power Factor | 0.9 |
| Transfer Time | 0 ms |
| Relative Humidity | 0-95% non-condensing |
| Management Interface | LCD Display |
| Power Rating | 1000 VA - 10000 VA |
| Input Voltage | 208/220/230/240 VAC |
| Output Voltage | 208/220/230/240 VAC |
| Output Frequency | 50/60 Hz |
| Battery Type | Maintenance-free sealed lead-acid battery |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -15 to 50°C (5 to 122°F) |
| Communication Ports | USB, RS-232 |
| Form Factor | Rack/Tower |
| Audible Noise | < 50 dBA at 1 meter (model dependent) |
| Dimensions (HxWxD) | Varies by model |
| Weight | Varies by model |
Procedures and safety rules for installing the UPS.
Instructions for installing the UPS in rack or tower configurations.
Steps for setting up the UPS, including connections, power on, and software.
Guide to adjusting UPS settings through the menu interface.
Lists fault events, codes, and icons for troubleshooting.
Step-by-step instructions for replacing batteries in rack UPS units.
To Next Page