Vertiv Liebert Trinergy Cube - Default Chapter; Table of Contents

TABLE OF CONTENTS
1 Important Safety Instructions 1
2 Introduction 5
2.1 General Description 5
2.2 Modes of Operation 8
2.2.1 Functions 8
2.3 Special Features 9
2.3.1 Smart Safe and Reliable Operation 9
2.3.2 Easy Installation and Operation 9
2.3.3 Battery Management 9
2.3.4 Environment, EMC 9
2.3.5 Modern Technology 10
2.4 Options 10
2.5 Setpoints (User Adjustable) 11
3 Operation 13
3.1 Touchscreen Navigation 13
3.1.1 Single UPS - switching to Automatic operating mode 14
3.1.2 Single UPS - switching to System Bypass 15
3.1.3 Parallel UPS System - switching to Automatic operating mode 15
3.1.4 Parallel UPS System - switching to System Bypass 15
3.2 Manual Operations—All Systems 15
3.2.1 Startup—Single Module System 19
3.2.2 Load Transfer and Retransfer—Single-Module System 21
3.2.3 Maintenance Bypass Load Transfers—Single-Module System 21
3.2.4 1+N Systems 23
3.2.5 Load Transfer 1+N System: Remove a UPSfrom System (Collective) 24
3.2.6 Load Transfer 1+N System:Add a UPSto the System (Collective) 25
3.2.7 Load Transfer 1+N System—Transfer System Inverter to Bypass 25
3.2.8 Load Transfer 1+N System:Transfer System from Bypass to Inverter 25
3.2.9 Maintenance Bypass Load Tranfers—1+N Module System 26
3.2.10 Shutdown—1+N System Shutdown 27
3.2.11 Energize the Transformer 28
4 Maintenance 29
4.1 Safety Precautions 29
4.2 Routine Maintenance 30
4.2.1 Record Log 30
4.2.2 Air Filter 30
4.2.3 Limited life components 31
4.3 Battery Maintenance 32
4.3.1 Battery Safety Precautions 32
4.4 Detecting Trouble 34
Vertiv | Liebert® Trinergy Cube™ Operation and Maintenance Guide | i