Need help?Do you have a question about the Vertiv Liebert APM and is the answer not in the manual?
General| Topology | Double Conversion Online |
|---|---|
| Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz |
| Battery Type | Valve Regulated Lead Acid (VRLA) |
| Communication Interface | SNMP |
| Display | LCD |
| Operating Temperature | 0°C to 40°C |
| Relative Humidity | 0 to 95% non-condensing |
| Dimensions (W x D x H) | Varies depending on configuration. Refer to specific model documentation. |
| Weight | Varies depending on configuration. Refer to specific model documentation. |
General warnings and requirements for safe operation and installation.
Compliance with European, international, and UPS product standards.
Warning regarding high earth leakage current and requirements for RCCB/RCD devices.
Warning about backfeeding protection and circuit isolation.
Warnings and precautions for handling batteries with high voltage.
Overview of installation requirements for the UPS rack system.
Guidelines for selecting the UPS installation location.
Instructions for placing, moving, and securing UPS cabinets.
Selection and installation of external circuit breakers and RCDs.
Guidelines for designing and installing power cables.
Connecting control and communication interfaces.
Key considerations for battery installation, use, and maintenance.
Safety guidelines specific to battery modules and cabinets.
Step-by-step instructions for installing batteries.
Procedures and precautions for maintaining UPS batteries.
Installation of UPS units in a parallel configuration.
Description of various UPS operating modes.
Configuration of battery charging and protection during commissioning.
Configuration of battery low pre-warning and EOD protection.
Warning about hazardous voltages behind protective covers.
Step-by-step guide for powering on the UPS.
Transferring load to maintenance bypass for servicing.
Comprehensive list of UPS events and alarms with meanings.
To Next Page