Vertiv™ NetSure™ 7100 Series -48 VDC Power System User Manual
1 Customer Documentation Package
This document (UM582127000) provides User Instructions for Vertiv™ NetSure™ -48 VDC Power System Model 7100, Spec. No.
582127000.
NOTE!
582127000 List 100, 101, 102, 203, 500, 501, 502, 503, 600, 601, 900, and 901 are specific configurations of 582127000.
Separate User Instructions and Installation Instructions are provided with these power systems. For 582127000 List 100, 101,
102, 203, 500, 501, 502, and 503; do not use these instructions. Refer to IM582127000100 and UM582127000100 for
instructions. For 582127000 List 600, 601, 900, 901; do not use these instructions. Refer to IM582127000900 and
UM582127000900 for instructions.
The complete Customer Documentation Package consists of…
-48 VDC Power System Installation Manual
• Power System Installation Instructions: IM582127000
NCU Controller User Manual
• NCU Controller User Instructions: UM1M830BNA
USB Drive with All Customer Documentation
• Power System Quick Start Guide: QS582127000
• Power System Installation Instructions: IM582127000
• Power System Installation Instructions: IM582127000100 (instructions for List 100, 101, 102, 203, 500, 501, 502, and 503)
• Power System User Instructions: UM582127000
• Power System User Instructions: UM582127000100 (instructions for List 100, 101, 102, 203, 500, 501, 502, and 503)
• NCU Controller User Instructions: UM1M830BNA
• Rectifier Instructions: UM1R483500e
• Rectifier Instructions: UM1R483500e3
• Rectifier Instructions: UM1R482000e3
• -48 VDC to +24 VDC Converter Instructions: UM1C48241500
• -48 VDC to -58 VDC Converter Instructions: UM1C48582000P3
• Power System “System Application Guide”: SAG582127000
• NCU Controller 2nd Ethernet Port Add-On Kit Instructions: IM559252
• NCU Controller 2nd Ethernet Port Retrofit Kit Instructions: IM559251
• Engineering Drawings
• Also provided on the USB drive is a controller configuration drawing and the controller configuration files loaded into the
controller as shipped.