Vertiv™ NetSure™ 7100 Series -48 VDC Power System User Manual
3.4 Local Controls and Indicators
Refer to the controller, rectifier, and converter instructions for descriptions of the local controls and indicators located on these units.
If the system is installed in an enclosure, an enclosure mounted LED kit is available which provides a factory installed LED located at
the top of the enclosure visible from the front with the door closed. This LED illuminates red if a major or critical alarm activates.
Refer to the next section for descriptions of the local controls and indicators located on the circuit cards installed in the distribution
cabinet.
Circuit Card Locations
Refer to Figure 3.1.