Vertiv VRC1 Series Installer/User Guide

2 EQUIPMENT INSPECTION AND HANDLING
Safety Precautions
WARNING! Risk of handling heavy unit and component parts. Can cause injury and equipment
damage. Use OSHA-recommended safe lifting techniques and/or lifting equipment rated for the
weight of the unit. Unit weights are specified in Table 1.3 on page5.
WARNING! Risk of improper moving. Can cause equipment damage, injury or death. Use only
lifting equipment that is rated for the unit weight by an OSHA-certified rating organization. The
center of gravity varies depending on the unit size.
CAUTION: Risk of contact with sharp edges, splinters, and exposed fasteners. Can causeinjury.
Only properly trained and qualified personnel wearing appropriate, OSHA-approved PPEshould
attempt to move, lift, remove packaging from or prepare the unit for installation.
NOTICE
Risk of damage from forklift. Can cause unit damage. Keep tines of the forklift level and at a
height suitable to fit below the skid and/or unit to prevent exterior and/or underside damage.
NOTICE
Risk of improper storage. Keep the unit upright, indoors and protected from dampness,
freezing temperatures and contact damage.
Upon arrival of the unit and before unpacking:
• Verify that the labeled equipment matches the bill of lading.
• Carefully inspect all items for visible or concealed damage.
• Report damage immediately to the carrier and file a damage claim with a copy sent to Vertiv™
or to your sales representative.
Equipment Recommended for Handling the Packaged Unit:
• Pallet jack or forklift
• Utility knife
2 Equipment Inspection and Handling
7

Vertiv VRC1 Series Specifications

General

Brand	Vertiv
Model	VRC1 Series
Category	Freezer
Language	English