Vertu Constellation - Page 103

Select > Maps.
1 Select a place and its info area at the top of the screen.
2 Select Navigate > Walk here.
By default, the map is oriented to north.
Rotate the map to your walking direction
Select . To rotate the map back to north, select again.
You can also select what type of route you want walk navigation to follow.
Select the walking mode
1 Select
> Settings > Maps & Walk > Route settings.
2 Select Preferred route > Streets or Straight line.
Straight line is useful on off-road terrain as it shows the walking direction.
While walking, you can check the dashboard for info, such as how far you have walked
and what your average speed has been.
Check the tripmeter from the dashboard
In the walk navigation view, select
> Dashboard.
Reset the tripmeter
Select
> Reset. To reset all counters, select > Reset all.
Set voice guidance for walk navigation
You can easily change the language for voice guidance, or deactivate it completely.
By default, the language used for Maps voice guidance matches the general language
settings of your phone. You can change the language used for walk guidance before
you start navigating.
If you select a language that includes street names, also the street names are said
aloud. Voice guidance may not be available for your language.
Select
> Maps.
Change the voice guidance language
Select
> Settings > Maps & Walk > Voice guidance and a language.
Deactivate voice guidance
Select
> Settings > Maps & Walk > Voice guidance > None.
Maps 103
© 2012 Vertu. All rights reserved.