Vertu Constellation - Call Handling Features

Commands are automatically created by your phone.
Tip: When entering contacts or editing voice commands, do not use very short or
similar names for different contacts or commands.
1 When a Bluetooth headset with a headset key is attached, press the headset key.
2 A short tone sounds, and Speak now is displayed. Clearly say the contact name.
3 The phone repeats the contact's name, and displays the name and number. To
cancel the voice dialling, select Quit.
Tip: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialling in all circumstances.
Listen to a voice command for a contact
1 When a Bluetooth headset with a headset key is attached, select a contact and
> Voice tag details.
2 Select a contact detail.
If several numbers are saved for a name, you can say also the name and the number
type, such as mobile or telephone.
Reject a call
When a call arrives, select .
To send a message explaining why you cannot answer the call, proceed as below.
Send the reject call text message
1
When a call arrives, select
, and edit the message.
2
To send the message, select
.
3 Reject the call.
Edit the standard reject call text message
Select
> Settings and Calling > Call > Message text, and write the message.
Tip: You can automatically divert rejected calls to your voice mailbox or another
phone number (network service). Select > Settings and Calling > Call divert >
Voice calls > If busy > Activate > To voice mailbox or To other number.
Mute a call
You can mute the microphone in your device during a call.
Select the mute icon
.
Calls 47
© 2012 Vertu. All rights reserved.