Clock
Analogue and digital clock
The clock, displayed on the default home screen, does the following:
• Displays time and date in either analogue or digital format, selectable using the
relevant widget.
• Displays alarms set for the next 12 hours (analogue display only).
• Displays free and busy periods taken from the Calendar, around the clock bezel
(analogue display only).
• Maintains time using the automatic time feature.
• Displays the local time or, if you are roaming, displays both the local time and the
time in your home location.
Work with the clock as follows:
• To set an alarm, tap the centre of the clock.
• To display an appointment preview pop-up, tap the appropriate quadrant of the
clock. Tap the pop-up to open the appointment.
• To remove the appointment pop-up, tap the screen again.
Switch between analogue and digital display
1 On the default home screen, select the clock.
2 In the Clock panel, tap the image of the clock to toggle the display between digital
and analogue format.
3
Select
to return to the default home screen, which now shows the clock in the
selected format.
View calendar appointments
The calendar entries for each day are indicated by arcs around the edges of the
analogue clock on the default home screen.
To view or amend the entries, tap the relevant quadrant on the clock, and then tap the
individual entries on the resultant pop-up.
Set an alarm
Alarms are set from the clock. Alarms can be repeated daily, weekly, or on workdays,
or not repeated. A number of alarms can be set.
Once an alarm has been set, it is indicated by a red marker on the analogue clock.
1 On the default home screen, select the centre of the clock.
2
Select
.
3 Set the time for the alarm.
30 Home screen
© 2012 Vertu. All rights reserved.
To Next Page
Loading...
