VESDA by Xtralis VESDA VLF-500 Product Guide
www.xtralis.com 49
10.3 Display/Relay Configuration
Button Lockout Enabled/Disabled
Smoke Test
Reset
Isolate
AutoLearn Smoke
AutoLearn Flow
Relays Connected Yes/No
GPI Connected Yes/No
GPI Function
10.4 Relay Configuration
Relay 1 2 3 Start-up Latching
Fault
Action
Fire 1
D= Normally De-energized; E= Normally Energized
10.5 VESDAnet Interface Card (VIC-010) (plug-in)
VESDAnet Interface Card
Installed
Yes/No
Card Serial Number
Preferred Port Port A/Port B
Loop Open Ended on this card Yes/No
10.6 VESDAnet Multi-Function Relay Card (VIC-020/VIC-030)
Relay Relay 1 Relay 2 Relay 3 MPO GPI Startup Latching
Alert
Fire 2
Disabled
Standby
Disable MPO
Monitor External
Device
To Next Page
Loading...
