a、Select the proper power supply according to the voltage and power on the
nameplate.
b、Connect the power wire and supply, ensuring the yellow and green wires were
connected with the ground wire firmly.
Caution:
a.For safety, ensure the ground connection is in good condition.
b.All the exterior wires and other appliances must confirm with
national standard.
c、If the voltage fluctuation range is extensive (± 10% over the rated voltage), it will
cause many faults, such as the machine can’t be started, the electronic control
board is damaged, or the compressor being damaged. Therefore, you must use a
suitable automatic voltage regulator.
For the LB360T,LB440T,LB400TA, LB550TA,you must remove the decorative
panel so as to turn on the power.
4. Connect the water supply pipe
To Next Page
Loading...
