Unpack the Sander and lay out the components, checking to ensure that
no damage was suffered during transit. Any damage should be reported to
your VEVOR dealer immediately.
Loose items are as follows, referring to the illustration above:
A: 1 x Disk Sanding Table
B: 1 x Belt Sanding Table
C: 1 x Mitre Gauge
D: 1 x Sand Disk Cover/Dust Extraction Port
E: 2 x Disk Sanding Table Locking Levers
F: 1 x Vertical Sanding Table Locking Lever
G: 3 x Flat Washers (for use with Locking Levers)
H: 4 x Rubber Feet
J: 2 x Allen Keys
To Next Page
Loading...
