VEVOR MX-S716G - Quill Locking; Tail Feed Adjustment

- 13 -
 Quill Locking: Rotate the lever clockwise to lock the spindle and
anti-clockwise to unlock.
 Tail Feed Adjustment: Rotate the tail feed handwheel clockwise to
advance the tailstock towards the chuck. Rotate the handwheel
anti-clockwise to move the tailstock away from the chuck
OPERATION
1. Emergency Button: 0N/0FF Switch
2. The machine is switched on and off with ON/OFF button. Depress to stop all
machine functions. To restart, lift the cover and press ON button.
3. Change-over Switch
After the machine is switched on, turn the switch to "F" position for
counter-clockwise spindle rotation(forward). Turn the switch to"R" position for
clockwise spindle rotation(reverse) ."O"position is OFF and the spindle remains
idle.
4. Variable Speed Control Switch
Turn the switch clockwise to increase the spindle speed. Turn the switch
counter-clockwise to decrease the spindle speed. The possible speed range is
dependent on the position of the drive belt.
5. Carriage Lock
Turn hex socket cap screw clockwise and tighten to lock. Turn counter-clockwise
and loosen to unlock.