EasyManuals Logo

Vexta aStep AS Series User Manual

Vexta aStep AS Series
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #60 background imageLoading...
Page #60 background image
60
Photocoupler input 5 VDC, 7 ~ 20 mA
CW (PLS), CCW (DIR)
Photocoupler input 5 VDC or 24 VDC, 16 mA maximum
C.OFF, ×10, ACL
Photocoupler/open-collector output 30 VDC maximum, 15 mA maximum
END, ALARM
Transistor/open-collector output (Current sink output) 30 VDC maximum,
15 mA maximum TIM1, ASG1, BSG1
Line driver output
TIM2, ASG2, BSG2
Single-phase100-115 V
+10%
50/60 Hz 6.5 A
Single-phase200-230 V
+10%
50/60 Hz 4.5 A
Three-phase200-230 V
+10%
50/60 Hz 2.4 A
-
15%
-
15%
-
15%
Single-phase100-115 V
+10%
50/60 Hz 6 A
Single-phase200-230 V
+10%
50/60 Hz 3.5 A
Three-phase200-230 V
+10%
50/60 Hz 1.9 A
-
15%
-
15%
-
15%
Standard type
Electromagnetic-
brake type
Single-phase100-115 V
Single-phase200-230 V
Three-phase200-230 V
Single-phase100-115 V
Single-phase200-230 V
Three-phase200-230 V
Unit model
Round shaft type
1 The value is reduced to approximately 50% by the current-cutback function when the motor operates in combination with a
dedicated driver.
2 The value for the driver’s power-supply input current represents the maximum input current, which varies with pulse speed.
3 These are specifications for the electromagnetic-brake type only.
4 The figures in parentheses [ ] are specifications for the electromagnetic-brake type.
±5
0.36°/Pulse
0.036°/Pulse
0.72°/Pulse
0.072°/Pulse
AS911AA
AS911AC
AS911AS
-
-
-
4.0 (560)
2710 × 10
-7
4
(14.8)
4
AS98AA
AS98AC
AS98AS
AS98MA
AS98MC
AS98MS
2.0 (280)
1400 × 10
-7
[1559 × 10
-7
]
4
(7.7 [8.5])
4
Maximum holding torque
1
Rotor inertia
Stop position accuracy
Resolution
Driver’s power
source input
voltage
2
Input signal
Output signal
Electromagnetic brake
3
Mass
1000 P/R
10000 P/R
500 P/R
5000 P/R
(Resolution as set
via the resolution
selector switch.)
Power supply input voltage/current
Power consumption
Static friction torque N·m (oz-in)
Motor kg (lb.)
Driver kg (lb.)
N·m (oz-in)
J: kg·m
2
(oz-in
2
)
Arc minutes
0.8 (1.76)
-
-
-
-
3.0 (6.6)
Active when power is off
24 VDC±5% 0.25 A
6 W
1.0 (142)
1.8 [2.2] (3.96 [4.84])
4
Single-phase100-115 V
Single-phase200-230 V
Three-phase200-230 V

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vexta aStep AS Series and is the answer not in the manual?

Vexta aStep AS Series Specifications

General IconGeneral
BrandVexta
ModelaStep AS Series
CategoryDC Drives
LanguageEnglish