Colors of the working chamber lighting
If the working chamber lighting is insufficient,
provide additional lighting.
The machine illuminates the working chamber in
different colors. The color will change depending on
the state of the machine. You will find the colors and
respective machine status in the following table:
Color Status
White The machine is ready for operation.
You can open the working chamber door.
Blue The machine is operating.
The working chamber door is locked.
Red
A machine malfunction has occured.
The working chamber door is locked.
4.6 CAM computer
To operate the machine, you must use a computer
running Windows
®
(“CAM computer”) and specially
designed software (“manufacturing software”). The
manufacturing software consists of the following
components:
n
DENTALCAM ‒ A CAM application for creating
and calculating virtual blanks (“jobs”).
n
DENTALCNC ‒ A CNC application for machining
jobs and maintaining the machine.
To create and design the dental objects you also need
a CAD application (sold separately by specialist
dealers).
4.7 Anti-soiling concept
The anti-soling concept decreases the soiling and wear
of sensitive machine parts.
The anti-soiling concept does not replace the regular
cleaning of the machine. Without regular cleaning, the
machine life decreases significantly.
NOTICE
Machine damage when dry
machining without an air
extraction system
When dry machining, an operational external air extrac-
tion system must be installed. Otherwise, the machine
will get soiled over time and become defective.
Always use a correctly installed and operational
external air extraction system during dry machining.
The anti-soiling concept consists of:
Dry machining
n
The external air extraction system ‒ An
external suction unit creates a vacuum in the work-
ing chamber and extracts machining debris from
it.
n
Air that is emitted into the working cham-
ber ‒ Blows machining debris away from the
spindle and other machine parts.
n
The internal vacuum sensor ‒ Constantly
monitors the vacuum in the working chamber.
n
The ionizer ‒ The ionizer electrically discharges
machining debris of certain materials to reduce
their distribution in the working chamber.
Wet machining
The cooling liquid keeps machining debris away from
sensitive machine parts.
R5 – Machine overview
EN 13
Original Operating Instructions:R5
Version: 12/16/2021
To Next Page
Loading...
