VHF Z4 - User Manual

Z4
Original Operating
Instructions
dentalportal.info
Originalbetriebsanleitung
Instrucciones de uso originales
Mode d’emploi d’origine
Istruzioni d’uso originali

Summary

2 General safety instructions

DANGER

Critical safety warnings concerning incorrect operation and electric shock hazards.

WARNING

Safety warnings regarding respiratory diseases and crushing/cutting hazards from moving parts.

3 Operating regulations

Intended use

Defines the machine's purpose for creating dental objects by trained personnel.

Controlling the machine through software

Transportation and storage

4 Machine overview

Required computer hardware & software

5 Installing the machine

Choosing the installation site

Establishing the electric connection

Removing the transport lock

CAD computer & network integration

Internal CAM computer

Preparing the machine and CAD computer

Outlines hardware and software preparation for CAD/CAM integration.

Accessing the CAM computer

Accessing Windows on the CAM computer using a Remote Desktop connection

Accessing the CAM computer via hardware

Configuring the WiFi connection

Integrating the CAD with the CAM; CNC software

Preparing the CAM computer

Provides instructions for preparing the CAM computer for integration.

6 Operation: Preparing jobs

Starting the machine

Provides instructions and warnings for starting the machine.

Starting the machine with a tool in the collet chuck

Shutting down the machine

Opening & closing the working chamber door

Opening & closing the multi-purpose drawer

Exchanging the cooling liquid and cleaning the tank

Exchanging or filling in the cooling liquid

Managing tools

Inserting and exchanging tools

Mounting & exchanging tool magazines

Mounting & removing blanks

7 Operation: Executing jobs

Starting jobs via the touchscreen

Outlines the workflow for selecting, checking, and executing jobs via the touchscreen.

Aborting machining

Job interruptions and job abortions

How to proceed in case of a job interruption

How to proceed in case of a machine malfunction

How to proceed in case of a tool breakage

How to proceed in case of a power failure

Emergency opening of the working chamber door

WARNING

Warns about crushing/cutting injuries if the door is open during machining.

CAUTION

Warns about cutting injuries when touching a rotating tool during emergency opening.

Emergency opening of the multi-purpose drawer

8 Maintenance and do-it-yourself

Where to get service?

Using the maintenance section

List of all maintenance tasks

Performing maintenance tasks

Cleaning the working chamber

Performing the weekly cleaning

Cleaning the collet chuck

Cleaning the nozzle plate

Cleaning the collet chuck of the blank holder

Rinsing the cooling liquid circuit

Exchanging the carbon filter

Cleaning the housing

Exchanging the main fuse

Calibrating the axes

Replacing the tool magazine inserts

Guides on replacing worn tool magazine inserts.

Exchanging the coupling of the cooling liquid tank

Exchanging the view window wiper

Updating the software and firmware

Updating the firmware of the machine

Explains firmware updates and the risks of interruption.

Updating DentalCAM & DentalCNC

Explains that customer service updates DentalCAM & DentalCNC.

Maintenance table

Wear parts that you can exchange yourself

Wear parts that customer service exchanges for you

9 Disposal

Disposing of the cooling liquid

Provides regulations and methods for disposing of cooling liquid and machining residues.

Disposing of the machine

Explains how to dispose of the machine and the associated responsibilities.

10 Troubleshooting

I cannot open the working chamber door

I have installed all components, started the software but the machine does not reference

My machine doesnt execute any jobs although it is connected to the computer

The machining results are not satisfactory and; or tools keep breaking

The machine displays that the flow rate is too low

I have exchanged the tool magazine inserts and now there are no holes for the tools anymore

VHF Z4 Specifications

General

Brand	VHF
Model	Z4
Category	Dental equipment
Language	English