Choosing the installation site
The installation site must meet the following criteria:
n
Firm and even surface, must be able to carry the
weight of the machine (66 kg)
n
Minimum required space: 620 x 620 x 650 mm
(W/D/H)
n
Ambient temperature (storage/ transport):
between -20°C and 60°C
n
Ambient temperature (operation): between
10°C and 32°C
n
Relative air moisture: max. 80, non-con-
densing
n
Machine location must be dust-free
n
Alternating current source with 100 – 240 V AC,
50/60 Hz
n
An operational Residual Current Device/ Ground
Fault Circuit Interrupter on the electric circuit of
the machine
n
Access to the internet and local computer net-
work via cable/ WiFi
Distances to maintain
NOTICE
Damaging of the machine if safety
distances are not maintained
If you do not maintain the safety distances, the
movable parts of the housing can collide with
obstacles when being opened and get damaged. If
the ventilation openings are covered, the machine
may overheat and get severely damaged.
Ensure that the following safety distances are
always maintained.
F
IG
. 10 – D
ISTANCES TO MAINTAIN
Original Operating Instructions:Z4
Version: 12/5/2018
Z4 – Installing the machine
EN 16
To Next Page
Loading...
