9 Disposal
Disposing of the cooling liquid
When disposing of the cooling liquid/ machining
residues, obey the following regulations.
Avoid entry of hazardous machining residues into
the soil, water or into sewers.
Obey the national and local laws of the disposal
location in any case.
If necessary, have the cooling liquid and machin-
ing residues disposed of by an approved disposal
company.
Keep a reference sample of the disposal product
for at least 6 months.
If you dispose of the cooling liquid yourself, do as
follows:
a.
Completely filter the machining residues out of
the used cooling liquid.
b.
Dispose of the liquid via the sewers.
c.
Dispose of the solid machining residues as
described by the manufacturer of the material.
Disposing of the machine
The machine must not be disposed of with the
residual waste.
We will dispose of the machine at no cost. The
owner will bear the costs for disassembly, packaging
and transport.
Before sending in the machine for disposal, con-
tact customer service.
If you dispose the machine yourself, obey by the
national and local laws of the disposal location.
Dismantling, transport and packaging
Ž
page 9
Copyright
Distribution or duplication of all content is only
allowed by written consent of vhf camfacture AG. This
includes reproduction by presentation and broad-
casting.
This document is published by:
vhf camfacture AG
Lettenstraße 10
72119 Ammerbuch, Germany
dentalportal.info
Z4 – Disposal
EN 71
Original Operating Instructions:Z4
Version: 12/5/2018
To Next Page
Loading...
