FIG. 40 THE COUPLING OF THE TANK AND ITS COUNTERPART
(COLORED GREEN)
12. Thoroughly clean the solid surface under the cool-
ing liquid tank.
FIG. 41 CLEANING THE SOLID SURFACE UNDER THE TANK (MARKED
ORANGE)
13. Dry the surface with a cloth.
14. Pull the cooling liquid sponge out of the slot on the
right side of the multi-purpose compartment.
FIG. 42 REMOVING THE COOLING LIQUID SPONGE
15. If the sponge is soiled, do the following:
a. If the sponge is moderately soiled, rinse it
under running water.
b. If the sponge is very soiled, replace it.
16. Wring the sponge out. Let it dry.
17. Insert a dry sponge into the slot.
18. Push the cooling liquid tank into the multi-purpose
compartment until the tank is properly attached to
the machine.
Original Operating Instructions:R5
Version: 12/16/2021
R5 – Operation: Preparing jobs
EN 36
To Next Page
Loading...
